DavidOverton.com
This site is my way to share my views and general business and IT information with you about Microsoft, IT solutions for ISVs, technologists and businesses, large and small.  
David Overton's Blog » All Tags » Microsoft » Tips » Support and Tools (RSS)

Browse by Tags

  • How to get SBS 2008 to "fix" managing WSUS after you have manually upset it

    Today's post covers what to do when SBS says it no longer can change the WSUS settings from the console.  The exact message is "Windows Small Business Server Update Service is not running because it automatically turns off if you customize Windows Server Update Services (WSUS)". One way round this problem is to manually change all the settings in the WSUS console (from Administrator Tools, select Microsoft Windows Update Services 3.0 SP1) and change the settings as per instructions found at http://blogs.technet.com/sbs/archive/2006/07/13/441594.aspx .  I'm a sort of "quick fix" kind of guy, so the easier way is to go to the same tool, but then run the wizard.  The steps are: Start the Wizard   Click through the first two screens and set the updates to come from Microsoft Update Configure the proxy if required and press next.  Then press Start Connecting.  When done, press Next again. Select the language(s) you want to download Make sure "All Products"...

  • SBS 2008 Migrations from SBS 2003 – Keys to Success from the Official SBS Blog

    I started to write about this at SBS 2003 to SBS 2008 migration thoughts and issues and Active Directory Health Checks , but after some discussion with the SBS team at Microsoft we now have much more: The Official SBS Blog : SBS 2008 Migrations from SBS 2003 – Keys to Success The purpose of this post is to help you complete your SBS 2003 migrations to SBS 2008 successfully on the first attempt. ……………… much, much more Use this information if you have a non-standard implementation or are concerned about the success of a migration. ttfn David Technorati Tags: Microsoft , SBS 2003 , SBS 2008 , Migration , SBSC , Small Business Server 2008

  • Active Directory Health Check - Make sure your AD is healthy before you migrate SBS 2003 to SBS 2008

    [updated 29/9/12 with new link] Given the recent comments about AD validation I thought I would share this excellent document on verifying your AD before you begin a migration (or at any other time) Active Directory Health Check - Active Directory This document outlines a basic procedure for validating the health of your domain and is a good practice for iterative maintenance and an excellent pre-check before doing any potentially dangerous domain operations I would add a couple of extra tests to the list in this document, which would be placed after the 1st DCDIAG test, also perform: DCDIAG /test:DNS /DNSALL /e /v DCDIAG /test:DcPromo /e /v DCDIAG /test:RegisterInDNS If you system passes these tests then it is a good indication of health. ttfn David Technorati Tags: SBS 2003 , Windows Server 2008 , Active Directory , migration , Microsoft , SBSC , Partners

  • How to upgrade (migrate) from SBS 2003 to SBS 2008 on the same system without using a swing migration

    Someone posted this question on a discussion group at work and it got me thinking. If you bought a nice new system over the last 2 or so years in preparation for SBS 2008 (Cougar as was or even SBS v.Next) and had it installed with SBS 2003 you've probably heard that SBS 2003 to SBS 2008 is a 2 box migration and needs the Swing technique to do an on box migration. I've come up with a much simpler solution, but your hardware might need some additions to make it work. So here is what you need: Box with 6GB of RAM minimum (4GB for SBS 2008, 1GB for SBS 2003 and 1GB for Hyper-V server). 1 new disk for SBS 2008 system disk and 1 disk to hold Hyper-V (which could be small if desired or temporary) System that meets the minimum system requirements of Hyper-V ( http://www.microsoft.com/servers/hyper-v-server/system-requirements.mspx ) You need to ensure your hardware is really up to spec and is fit enough that you want your new SBS 2008 system to run on it for the next 2+ years, otherwise this may well be a false...

  • Hyper-V Management console stops working after a month or so with error “Cannot connect to the RPC service on Computer ‘xxx’. Make sure your RPC service is running.

    [updated with net accounts command 20/2/2009] This can help diagnose and resolve the issue if like me, it was running fine and then it suddenly stops about 4-5 weeks after it all got started. My initial thought was that some update had changed things as the blog post here documented the initial setup where the same error was seen. The error once again looked like this: However checking all the same firewall and other settings revealed nothing. Finally I discovered that the user I had created had a password setting that meant the password had expired. Simple, yet checking from the command line is a right royal pain. To fix, these were the commands I used: net user <username> “<new or existing passsword>” /active:yes /expires:never /passwordchg:no net accounts /maxpwage:unlimited Simple, yet the cause of so much time trying to fix. Hopefully this will solve it for you too. Thanks David Technorati Tags: Microsoft , Hyper-V , Error , User , Password

  • How to resolve errors like "Cannot connect to the RPC service, make sure your RPC service is running" with Hyper-V Server and Hyper-V Manager

    In my last post on installing Hyper-V for my home setup I said I had a number of issues.  One was that the Hyper-V Manager kept on showing the error "Cannot connect to the RPC service, make sure your RPC service is running".  This turned out to be several issues. To start with my Hyper-V box is in a workgroup, so security is manually configured.  Then there is the connection ID security - by hand and finally there is the client setup too.  I spent a long time with John Howard's blog which got me the following commands for the Hyper-V server: netsh advfirewall set currentprofile settings remotemanagement enable netsh advfirewall firewall set rule group="Windows Management Instrumentation (WMI)" new enable=yes netsh advfirewall firewall set rule  name="Remote Administration (RPC-EPMAP)" new enable=yes profile=domain netsh advfirewall firewall set rule name="Remote Administration (NP-In)" new enable=yes profile=domain netsh advfirewall firewall...

  • Can't find the WSS (Windows SharePoint Services) sales and marketing toolkit for SBS 2003 - here it was

    I've had someone ask me about the WSS toolkit that was referenced at How to Sell, Deploy, and Build Business with Microsoft Windows Sharepoint Services 3.0 and SBS 2003 R2 . The download location has moved to http://www.partnersalesresources.com/Pages/sbskit.aspx# . ttfn David Technorati Tags: Windows SharePoint Services , WSS v3 , SBS , SBS 2003 R2 , Microsoft , Partners

  • SBS 2008 systems limitations and functions are the same as Windows Server 2008

    With SBS 2003 R2, some of the Windows Server 2003 R2 features were not included. I asked today where we were with SBS 2008 and the CPU, Memory and feature lists are, so I am told, the same. On the page http://www.microsoft.com/windowsserver2008/en/us/compare-specs.aspx it talks about the max number of procs, memory etc for Windows Server 2008 Standard. You should use these to represent SBS 2008, however, note SBS 2008 has it’s own minimum requirements. See below for the important points KEY: = Not Available = Available Specification Standard Enterprise X64 Sockets 4 8 X64 RAM 32 GB 2 TB Failover Cluster Nodes (Nodes) 16 Fault Tolerant Memory Sync Cross-File Replication (DFS-R) Network Access Connections (RRAS) 250 Unlimited Network Access Connections (IAS) 50 Unlimited Terminal Services Gateway 250 Unlimited Virtual Image Use Rights 1 4 The features of Windows Server 2008 that are in Standard Edition can be found here - http://www.microsoft.com/windowsserver2008/en/us/differentiated-features.aspx which should...

  • Configuring OneCare for Servers in SBS 2008

    The Console setup process ( Once SBS is set up, how to do the basic configuration through the management console ) sets up SBS 2008 for use. OneCare for Servers provide anti-malware capabilities and is an important part of the system integrity. SBS 2008 comes with a trial of OneCare and so far I’ve found it very effective. Setup today requires two updates that it downloads and applies itself: Notice that the initial configuration immediately informs you that you need to update Start the process, tell OneCare which country you are in and and accept the EULA. The download starts, updates and finishes If you have an activation key, or wish to purchase one you carry on through the process, switching to a web site to complete the process Note, DO NOT try to activate your trial in the Technical Preview unless you have already been provided with a key If you have been going through the Console in order then this is it baring the enabling of Office Live. Finally, all the SBS 2008 entries can be found at http://davidoverton...

  • Set up Microsoft Office Live Small Business Web sites

    The Console setup process ( Once SBS is set up, how to do the basic configuration through the management console ) sets up SBS 2008 for use. One of the options is for a spit personality Office Live for Small Businesses solution. Why split, well the e-mail items are held on the SBS 2008 Exchange server, as will the report site services, but the public web site and WSS external collaboration sites will be hosted on the Office Live servers. This means that things like DNS need a bit more management, but that can all be handled for you. This is how I configured mine: Start the process from the console and say I want a new site. Since SBS 2008 already knows the external address of the SBS box, it offers to enable the DNS to be redirected to Office Live for the www.mydomain.com address We then get into the Office Live sign-up process via the web. One word of note here, I had installed the box as a US system, not a UK system, so it took me to the US site. If you change the language settings in the browser (Tools/Options...

  • EBS 2208 and SBS 2008 Upgrades & Migrations from SBS 2003 and SBS / EBS 2008

    I saw over on Nicholas's blog post - Nicholas King : EBS/SBS Upgrades & Migrations that he has started to answer some of the questions around system upgrades and migrations. Below are some snippets of key information he has shared. Read his blog post for more. However, key thoughts for me are: 1) no in box SBS 2003 -> SBS 2008 upgrades. This is a box to box migration process. If you have SA or FPP copies of SBS 2003 then you can potentially do a P2V and then migrate from the virtual image. If not, I would consider running a VM of Windows Server to enable you to move the domain at least 2) Moving from one box to another (eg hardware upgrades in the future) are now supported. This can potentially be used to go from a RC0 build to RTM, but it is not tested or supported, however that does not mean it will not work!! 3) There is a GREAT document linked below that describes a migration in glorious detail EBS/SBS Upgrades & Migrations Recently I had several people ask me whether it is possible or supported...

  • How to configure server backup in SBS 2008

    [updated due to Vlad's link] - to see the rest of the articles on SBS 2008 click here SBS 2008, like SBS 2003, comes with a server backup tool. Unlike SBS 2003, this one supports USB drives as a great removable solution,but does not support tapes. Tapes are not really required unless you need good archival solutions as keeping a rotation of tapes in a warehouse for 10 years would be more cost effective than keeping a stack of USB drives. The Console setup process ( Once SBS is set up, how to do the basic configuration through the management console ) sets up SBS 2008 for use. As you work down the list in the console you will come to backup. The process to enable this is all quite simple: The 1st time I ran the tool I did not have a removable drive attached to the system, so it failed to start the process properly I then attached my 500GB external drive and started again. I picked my device and gave it a name: Chose what got backed up (note that everything from the system drive gets backed up!), when and then...

  • How to configure a Smart Host for Internet e-mail in SBS 2008

    The Console setup process ( Once SBS is set up, how to do the basic configuration through the management console ) sets up SBS 2008 for use. Once the internet facing services are set up you might have to enable “Smart Hosts” – which basically means that your e-mail is sent out via your ISPs mail server. This is a simple process which I have documented below: Since I am using NTL / Virgin media as my provider, I had to send via mail.ntlworld.com. Do this and and hit next and then the system will send mail this way. That is it. One again that is it for this stage. Finally, all the SBS 2008 entries can be found at http://davidoverton.com/blogs/doverton/archive/tags/SBS+2008/default.aspx ttfn David Technorati Tags: Microsoft , SBS 2008 , SBS , Tips , SBSC , Small Business , Small Business Server 2008 , Community , Partner , Console , E-mail , Smart hosts

  • Setting up services for the internet in SBS 2008 console (domain name, web site, Remote web workplace, e-mail)

    The Console setup process ( Once SBS is set up, how to do the basic configuration through the management console ) sets up SBS 2008 for use. Once the internet settings are completed, the next big steps is setting up the internet facing services. This is the process I followed: 1) The 1st time I had to create a domain for my server 2) I chose to do this using the provided tools (this then provides DNS management of www.domain.com going to Office Live, but remote.domain.com going to this server and the MX record pointing to the SBS box too. 3) Once you have chosen your provider you go off to a web page to purchase the domain 4) Then you enter your login details It you already have a domain then the process looks like this: 1) Enter your domain and provider details 2) confirm the details and enter them as per step 4 above Continue the process from above as the tool configures the system. Note that if your router does not accept UPnP (or it is turned off, as per mine), then you will get the warning and errors shown...

  • Setting up your internet connection in SBS 2008 console

    The Console setup process ( Once SBS is set up, how to do the basic configuration through the management console ) sets up SBS 2008 for use. One of the first steps is setting up the internet connection. This is the process I followed: The routines automatically detected the router IP address – I had not set it anywhere Then finished off The process of enabling others to communicate with SBS and setting up firewall etc can be found here . Finally, all the SBS 2008 entries can be found at http://davidoverton.com/blogs/doverton/archive/tags/SBS+2008/default.aspx ttfn David Technorati Tags: Microsoft , SBS 2008 , SBS , Tips , SBSC , Small Business , Small Business Server 2008 , Community , Partner , Console , Connect to the internet

  • Simple items in the SBS 2008 Console setup

    The Console setup process ( Once SBS is set up, how to do the basic configuration through the management console ) has a few items that are just one or two screens, so rather than dedicating a separate post to them, here they are by themselves: There are then the following steps that took me about 20-mins to complete: 1. Read the document on how to use the SBS console 3. Accept the Customer feedback option 5. Adding a trust certificate (I don’t have one, but I’ll show you the screen shot) ttfn David Technorati Tags: Microsoft , SBS 2008 , SBS , Tips , SBSC , Small Business , Small Business Server 2008 , Community , Partner , Console

  • Once SBS is set up, how to do the basic configuration through the management console

    [updated 5th June 2008 - as last 2 sections now online] I saw Vijays’s post on SBS 2008 RC0 Installation Walkthrough (which points to this post – walkthrough ) and while this article has much good information, I had grabbed the install process in screen shot again :-) There were a few interesting points that I thought I would share too: Once the install has finished, you need to do the post install configuration: If you have done it right you will see a screen like this: If you have had a number of problems in the install then you will see something like this: and then . I got this by hitting the power button on the keyboard while the setup was running and while I said “no” to the “do you want to shutdown” prompt, it appears it killed the setup process in the background. If you get this sort of setup, I spent a few hours trying to resolve and while I did re-install exchange and then load ForeFront, it was easier to just re-format and start again. OK, so if it is working the console should look like this: There...

  • How to change spam settings on Exchange 2007 / SBS 2008 to enable some / all / more spam to be delivered to an account for analysis

    One of the settings I wanted to change in SBS 2008 was the spam filter settings – some mails that I was receiving were being deleted without any option for me to review them. Since I had to go and read the manual on this, I thought I would share the answer on this. Open the Exchange Management Console Select the Organization Configuration and then Hub Transport Select the Anti-spam and look at Content Filtering By default the “Reject messages” SCL rating is set to 7. I change this to 8, enable "Quarantining messages” for messages above a level of 6 Finally, you need to enter the e-mail of a mailbox to receive the quarantined e-mail You can see how this impacted the e-mails themselves in the daily report – notice the number of mails still rejected / quarantined: That is it. See all the other SBS 2008 items at http://davidoverton.com/blogs/doverton/archive/tags/SBS+2008/default.aspx ttfn David Technorati Tags: Microsoft , SBS , SBS 2008 , Small Business Server 2008 , Exchange 2007 , Tips , Spam , Content Filtering

  • How to get DNS and DHCP working on a Windows Server from behind the Windows Firewall

    I have a Windows Home Server at home and I decided I wanted it to be responsible for handing out DHCP and DNS addresses in the house. All very good, but when I set up the services none of it worked because of the built in Windows Firewall. While I could have just turned off the Firewall I decided to learn how to put the holes into the firewall to make it work with the firewall, thus maintaining better security. A quick search of the web showed me many settings, but it did not seem to cover the whole picture – then I came across the MS site Windows Firewall Settings which has things broken down into these four handy sections that shall for ever more be my guides to ports and firewalls in the Microsoft world. What is more, as you will see later, the tips in here as to how to get things working, getting over common hurdles is quite stunning too: Windows Firewall Settings: Optional Components Windows Firewall Settings: Remote Administration Tools Windows Firewall Settings: Server Roles Windows Firewall Settings: Services...

  • Small Business Server 2003 Best Practices Analyzer Updated - from the Official SBS Blog

    Yesterday we announce SBS 2008 and now there is the updated best practice analyzer for SBS 2003 - The Official SBS Blog : Small Business Server 2003 Best Practices Analyzer Updated - the updates are below Small Business Server 2003 Best Practices Analyzer Updated The SBS 2003 Best Practices Analyzer configuration file has been updated with new rules. There are approximately 100 new rules and many pre-existing rules have been improved based on your feedback. To check to see if you have the latest configuration file go to Start>All Programs>SBS Best Practices Analyzer , then click on the About the Best Practices Analyzer link. The updated configuration file version is 2.1.18.0. If you still have the old version (2.1.4.0), click on the Updates and Customer Feedback link. Then click on the Check for Updates Now link. Some of the new rules include: Expanded checks for Blue Shield issues relating to WSUS Checks for the .Net Framework version for Companyweb Resolved some issues with the WSS and DST update checks...

  • What has happened in management over the last 2 months - downloads and information for System Center, MOM, SMS, Forefront and even a bit of ITIL

    This informaiton can be found (and more) at the TRM blog can be found here http://blogs.technet.com/trm/ . News SMS&MOM http://blogs.technet.com/smsandmom/default.aspx Nexus SC: The System Center Team Blog http://blogs.technet.com/systemcenter/ Microsoft System Center Configuration Manager 2007 International Client Packs released Two ICP packs for ConfigMgr have been released. ICP1 contains the following languages: English, French, German, Japanese, Spanish ICP2 contains all languages from ICP1 plus the following: Chinese (Simplified),Chinese (Traditional), Czech, Danish, Dutch, Finnish, Greek, Hungarian, Italian, Korean, Norwegian, Polish, Portuguese (Brazil), Russian, Swedish, Turkish Webcasts TechNet Webcast: Client Monitoring with System Center Operations Manager 2007 (Level 200) - Friday, February 29, 11:30 AM Pacific Time (US & Canada) In this session, we show you some of the new features that we have built into Microsoft System Center Operations Manager 2007. By the end of this session, you will...

  • What can Microsoft do to help your business as a Microsoft Partner

    It is rare that I copy a MS web page directly, but the information in here is amazing and worth spreading the news on. I found the Microsoft Partner Drive Your Business web site and not only does it have the information below. It also has references like " Read How a Partner Maintains 100% Growth Year After Year ". If you have seen one or two of them, don't fret - look at all six options and tell me if even one of them was a nice surprise for you. Are you looking for ways to strengthen your business performance? Find out how partners in the Microsoft Partner Programme are outperforming 12 out of 14 industry benchmarks through market differentiation. Find Out the Partner Pathway to Business Performance Is your company as profitable as it could be? Take a comprehensive assessment that measures your business performance across key indicators, including profit margins and revenue growth. Get Your Customised Business Report Increase your market visibility, generate sales leads, and promote your business...

(c)David Overton 2006-23