Browse by Tags

Today's post covers what to do when SBS says it no longer can change the WSUS settings from the console.  The exact message is "Windows Small Business Server Update Service is not running because it automatically turns off if you customize Windows Server Update Services (WSUS)". One way round this problem is to manually change all the settings in the WSUS console (from Administrator Tools, select Microsoft Windows Update Services 3.0 SP1) and change the settings as per instructions found at http://blogs.technet.com/sbs/archive/2006/07/13/441594.aspx .  I'm a sort of "quick fix" kind of guy, so the easier way is to go to the same tool, but then run the wizard.  The steps are: Start the Wizard   Click through the first two screens and set the updates to come from Microsoft Update Configure the proxy if required and press next.  Then press Start Connecting.  When done, press Next again. Select the language(s) you want to download Make sure "All Products"...

Someone posted this question on a discussion group at work and it got me thinking. If you bought a nice new system over the last 2 or so years in preparation for SBS 2008 (Cougar as was or even SBS v.Next) and had it installed with SBS 2003 you've probably heard that SBS 2003 to SBS 2008 is a 2 box migration and needs the Swing technique to do an on box migration. I've come up with a much simpler solution, but your hardware might need some additions to make it work. So here is what you need: Box with 6GB of RAM minimum (4GB for SBS 2008, 1GB for SBS 2003 and 1GB for Hyper-V server). 1 new disk for SBS 2008 system disk and 1 disk to hold Hyper-V (which could be small if desired or temporary) System that meets the minimum system requirements of Hyper-V ( http://www.microsoft.com/servers/hyper-v-server/system-requirements.mspx ) You need to ensure your hardware is really up to spec and is fit enough that you want your new SBS 2008 system to run on it for the next 2+ years, otherwise this may well be a false...

With SBS 2003 R2, some of the Windows Server 2003 R2 features were not included. I asked today where we were with SBS 2008 and the CPU, Memory and feature lists are, so I am told, the same. On the page http://www.microsoft.com/windowsserver2008/en/us/compare-specs.aspx it talks about the max number of procs, memory etc for Windows Server 2008 Standard. You should use these to represent SBS 2008, however, note SBS 2008 has it’s own minimum requirements. See below for the important points KEY: = Not Available = Available Specification Standard Enterprise X64 Sockets 4 8 X64 RAM 32 GB 2 TB Failover Cluster Nodes (Nodes) 16 Fault Tolerant Memory Sync Cross-File Replication (DFS-R) Network Access Connections (RRAS) 250 Unlimited Network Access Connections (IAS) 50 Unlimited Terminal Services Gateway 250 Unlimited Virtual Image Use Rights 1 4 The features of Windows Server 2008 that are in Standard Edition can be found here - http://www.microsoft.com/windowsserver2008/en/us/differentiated-features.aspx which should...

The Console setup process ( Once SBS is set up, how to do the basic configuration through the management console ) sets up SBS 2008 for use. One of the options is for a spit personality Office Live for Small Businesses solution. Why split, well the e-mail items are held on the SBS 2008 Exchange server, as will the report site services, but the public web site and WSS external collaboration sites will be hosted on the Office Live servers. This means that things like DNS need a bit more management, but that can all be handled for you. This is how I configured mine: Start the process from the console and say I want a new site. Since SBS 2008 already knows the external address of the SBS box, it offers to enable the DNS to be redirected to Office Live for the www.mydomain.com address We then get into the Office Live sign-up process via the web. One word of note here, I had installed the box as a US system, not a UK system, so it took me to the US site. If you change the language settings in the browser (Tools/Options...

[updated due to Vlad's link] - to see the rest of the articles on SBS 2008 click here SBS 2008, like SBS 2003, comes with a server backup tool. Unlike SBS 2003, this one supports USB drives as a great removable solution,but does not support tapes. Tapes are not really required unless you need good archival solutions as keeping a rotation of tapes in a warehouse for 10 years would be more cost effective than keeping a stack of USB drives. The Console setup process ( Once SBS is set up, how to do the basic configuration through the management console ) sets up SBS 2008 for use. As you work down the list in the console you will come to backup. The process to enable this is all quite simple: The 1st time I ran the tool I did not have a removable drive attached to the system, so it failed to start the process properly I then attached my 500GB external drive and started again. I picked my device and gave it a name: Chose what got backed up (note that everything from the system drive gets backed up!), when and then...

The Console setup process ( Once SBS is set up, how to do the basic configuration through the management console ) sets up SBS 2008 for use. Once the internet settings are completed, the next big steps is setting up the internet facing services. This is the process I followed: 1) The 1st time I had to create a domain for my server 2) I chose to do this using the provided tools (this then provides DNS management of www.domain.com going to Office Live, but remote.domain.com going to this server and the MX record pointing to the SBS box too. 3) Once you have chosen your provider you go off to a web page to purchase the domain 4) Then you enter your login details It you already have a domain then the process looks like this: 1) Enter your domain and provider details 2) confirm the details and enter them as per step 4 above Continue the process from above as the tool configures the system. Note that if your router does not accept UPnP (or it is turned off, as per mine), then you will get the warning and errors shown...

The Console setup process ( Once SBS is set up, how to do the basic configuration through the management console ) has a few items that are just one or two screens, so rather than dedicating a separate post to them, here they are by themselves: There are then the following steps that took me about 20-mins to complete: 1. Read the document on how to use the SBS console 3. Accept the Customer feedback option 5. Adding a trust certificate (I don’t have one, but I’ll show you the screen shot) ttfn David Technorati Tags: Microsoft , SBS 2008 , SBS , Tips , SBSC , Small Business , Small Business Server 2008 , Community , Partner , Console

One of the settings I wanted to change in SBS 2008 was the spam filter settings – some mails that I was receiving were being deleted without any option for me to review them. Since I had to go and read the manual on this, I thought I would share the answer on this. Open the Exchange Management Console Select the Organization Configuration and then Hub Transport Select the Anti-spam and look at Content Filtering By default the “Reject messages” SCL rating is set to 7. I change this to 8, enable "Quarantining messages” for messages above a level of 6 Finally, you need to enter the e-mail of a mailbox to receive the quarantined e-mail You can see how this impacted the e-mails themselves in the daily report – notice the number of mails still rejected / quarantined: That is it. See all the other SBS 2008 items at http://davidoverton.com/blogs/doverton/archive/tags/SBS+2008/default.aspx ttfn David Technorati Tags: Microsoft , SBS , SBS 2008 , Small Business Server 2008 , Exchange 2007 , Tips , Spam , Content Filtering

Each month the TRM blog product this great summary of the Microsoft world in various product areas. The blog can be found here http://blogs.technet.com/trm/ News Help your customers securely deploy Windows Server 2008 with the Windows Server 2008 Security Guide! http://go.microsoft.com/fwlink/?LinkId=92550 Every day, adversaries attempt to invade your customers’ networks and access their servers—to bring them down, infect them with viruses, or steal information about customers or employees. Your customers are looking to Microsoft and Windows Server® 2008 to help them address these threats. To assist customers in taking full advantage of the rich security features in Windows Server 2008, Microsoft has developed the Windows Server 2008 Security Guide. The Windows Server 2008 Security Guide provides IT professionals with best practices, predefined security templates, and an automated deployment tool to help strengthen the security of servers running Windows Server 2008. Supporting Your Family, Friends, and Neighbours...

This comment was added to my blog the other day, but I think it deserves posting as a blog entry in it's own right: Hi Dave, We've worked up a 70-282 set of resources on a live.space. The effort is thorough and a good starting point for anyone looking at the 70-282 exam. Two particularly useful URL's are: http://wigital.spaces.live.com AND 70-282examteam.events.live.com You are welcome to contribute and/or comment if you have time. Warm Regards, Mark ttfn David Technorati Tags: SBSC , 70-282 , Exam , SBS Server , Community

It is funny how things happen. I was debating with my dad which was better - building a new server and re-joining the clients, migrating via AD in a VPC to give the server the same name or adding the server and dealing with the fact that the "server" has a name change. I then told my dad that I had blogged about this and he should have read the document, only to discover that I had not. I've seen it covered in a few places. I'm always open to feedback on this sort of information. I am pro-VM based migrations but people seem to think they are too hard, so more on that would be really good. The Official SBS Blog : Migrating Windows Small Business Server 2003 ... Migrating Windows Small Business Server 2003 to New Hardware - E-Bitz ... Whitepaper - Migrating SBS 2003 to New Hardware Microsoft has released a new whitepaper and set of worksheets entitled: ” Migrating Windows Small Business Server 2003 to New Hardware “ Sections include: Migrating Windows Small Business Server 2003 to New Hardware...

I have been asked a couple of times if there has been any updated info on the 70-282 exam and information on it. While looking through old blog entries I found this: A free webcast series hosted throughout the month of May by David Fabritius is being offered at MSReadiness.com. More information is available here - http://msreadiness.com/study70-282r2 . The Official SBS Blog : Studying for 70-282? This takes you to the MS Web site, where I found out that all the webcasts happened in the past, but the recording and blog are still there for you: To access the Study Group blog, visit us at http://blogs.technet.com/BackRoom . Using Self Test Software's great data bank of approved practice exam questions, we will review the material for the week on Fridays and help you check your preparedness for the actual exam. We will not only be looking at why an answer is correct, but also exploring why answers are wrong. Syllabus for 70-282 Study Group All of the sessions outlined below will be presented at 10 AM PDT on their...

I saw this had been published and thought I would share - it is an amazing tool that I use for diagnosis all the time. Reading http://www.ditii.com/2007/07/03/network-monitor-31-released/ it also reminded me that this includes traces on wireless networks!! Microsoft Network Monitor 3.1 Network Monitor 3.1 is a protocol analyzer. It allows you to capture network traffic, view and analyze it. Version 3.1 is an update and replaces Network Monitor 3.0. Network Monitor 3.x is a complete overhaul of the previous Network Monitor 2.x version. Supported Operating Systems: Windows Server 2003; Windows Server 2003 x64 editions; Windows Vista; Windows XP; Windows XP 64-bit It is suggested that you have a CPU of 1GHz or greater, 1G or greater of Memory and 25 Megs of available Hard Disk space, plus room for capture files. Supports Vista 64 bit as well as 32 bit. Instructions Network Monitor 3.1 can co-exist with Netmon2.x. NM3.1 installs in %program files%\Microsoft Network Monitor 3, so there is no conflict. But it will require...