DavidOverton.com
This site is my way to share my views and general business and IT information with you about Microsoft, IT solutions for ISVs, technologists and businesses, large and small.  
David Overton's Blog » All Tags » Tips » Windows Essential Server Solution Family » SBS 2008 (RSS)

Browse by Tags

  • How to get SBS 2008 to "fix" managing WSUS after you have manually upset it

    Today's post covers what to do when SBS says it no longer can change the WSUS settings from the console.  The exact message is "Windows Small Business Server Update Service is not running because it automatically turns off if you customize Windows Server Update Services (WSUS)". One way round this problem is to manually change all the settings in the WSUS console (from Administrator Tools, select Microsoft Windows Update Services 3.0 SP1) and change the settings as per instructions found at http://blogs.technet.com/sbs/archive/2006/07/13/441594.aspx .  I'm a sort of "quick fix" kind of guy, so the easier way is to go to the same tool, but then run the wizard.  The steps are: Start the Wizard   Click through the first two screens and set the updates to come from Microsoft Update Configure the proxy if required and press next.  Then press Start Connecting.  When done, press Next again. Select the language(s) you want to download Make sure "All Products"...

  • How to upgrade (migrate) from SBS 2003 to SBS 2008 on the same system without using a swing migration

    Someone posted this question on a discussion group at work and it got me thinking. If you bought a nice new system over the last 2 or so years in preparation for SBS 2008 (Cougar as was or even SBS v.Next) and had it installed with SBS 2003 you've probably heard that SBS 2003 to SBS 2008 is a 2 box migration and needs the Swing technique to do an on box migration. I've come up with a much simpler solution, but your hardware might need some additions to make it work. So here is what you need: Box with 6GB of RAM minimum (4GB for SBS 2008, 1GB for SBS 2003 and 1GB for Hyper-V server). 1 new disk for SBS 2008 system disk and 1 disk to hold Hyper-V (which could be small if desired or temporary) System that meets the minimum system requirements of Hyper-V ( http://www.microsoft.com/servers/hyper-v-server/system-requirements.mspx ) You need to ensure your hardware is really up to spec and is fit enough that you want your new SBS 2008 system to run on it for the next 2+ years, otherwise this may well be a false...

  • How to size the hardware required for SBS 2008

    This question has been asked many times and was once again asked today on an internal forum.  It is hard to come up with an explicit answer, but I feel I can give you some (personal, non-binding, your mileage may vary, please take with a pinch of salt and don’t sue me) opinions.  For SBS 2003 the non-scientific sizing appeared to go like this: “between 2 & 4GB of RAM, depending on number of users”.  I often saw a machine for around 25 users with 4GB of RAM and there was headroom. Disk – don’t buy 1.5TB disks, but don’t by 30GB either.  Buy largish and try to size data before you make the decision 1 CPU or 2, or perhaps more importantly, a box that can take 1 CPU or 2? The the time SBS 2008 arrived the difference in cost of a 2GB or 4GB box was trivial.  Now SBS 2008, if you want to be scientific about it would look something like this: Minimum specs are found at http://www.microsoft.com/sbs/en/us/system-requirements.aspx Think Windows Server 2008 for x users, plus Exchange sizing for...

  • SBS 2008 systems limitations and functions are the same as Windows Server 2008

    With SBS 2003 R2, some of the Windows Server 2003 R2 features were not included. I asked today where we were with SBS 2008 and the CPU, Memory and feature lists are, so I am told, the same. On the page http://www.microsoft.com/windowsserver2008/en/us/compare-specs.aspx it talks about the max number of procs, memory etc for Windows Server 2008 Standard. You should use these to represent SBS 2008, however, note SBS 2008 has it’s own minimum requirements. See below for the important points KEY: = Not Available = Available Specification Standard Enterprise X64 Sockets 4 8 X64 RAM 32 GB 2 TB Failover Cluster Nodes (Nodes) 16 Fault Tolerant Memory Sync Cross-File Replication (DFS-R) Network Access Connections (RRAS) 250 Unlimited Network Access Connections (IAS) 50 Unlimited Terminal Services Gateway 250 Unlimited Virtual Image Use Rights 1 4 The features of Windows Server 2008 that are in Standard Edition can be found here - http://www.microsoft.com/windowsserver2008/en/us/differentiated-features.aspx which should...

  • EBS 2208 and SBS 2008 Upgrades & Migrations from SBS 2003 and SBS / EBS 2008

    I saw over on Nicholas's blog post - Nicholas King : EBS/SBS Upgrades & Migrations that he has started to answer some of the questions around system upgrades and migrations. Below are some snippets of key information he has shared. Read his blog post for more. However, key thoughts for me are: 1) no in box SBS 2003 -> SBS 2008 upgrades. This is a box to box migration process. If you have SA or FPP copies of SBS 2003 then you can potentially do a P2V and then migrate from the virtual image. If not, I would consider running a VM of Windows Server to enable you to move the domain at least 2) Moving from one box to another (eg hardware upgrades in the future) are now supported. This can potentially be used to go from a RC0 build to RTM, but it is not tested or supported, however that does not mean it will not work!! 3) There is a GREAT document linked below that describes a migration in glorious detail EBS/SBS Upgrades & Migrations Recently I had several people ask me whether it is possible or supported...

(c)David Overton 2006-23