Setting up your internet connection in SBS 2008 console

re: Setting up your internet connection in SBS 2008 console

itumeleng — Sun, 03 Jan 2010 23:40:54 GMT

thanks david, my router has a static IP (196....)

so when the wizards detects sees the router IP, it automatically assigns my server IP to be( 196....2), which i need to change to internal IP, but when i do change it to 192.168.16.2, it still gives me an error that the server IP has to be private. that does not make sense to me..

re: Setting up your internet connection in SBS 2008 console

David Overton — Sat, 05 Dec 2009 18:56:32 GMT

itumeleng - SBS wizards only support a single NIC solution. This is the problem.

Thanks

David

re: Setting up your internet connection in SBS 2008 console

itumeleng — Fri, 04 Dec 2009 09:19:39 GMT

I have set up the SBS 2008 with two nic's. one for external network (internet) and the other for internal network.

I put IP address manualy on the nics to get internet connection and i was connected.

the problem is i cant run pop connector nor the internet domain name until i run the internet wizard.

however everytime i run the wizard it detect the router IP, but disables my internal card and refused to take any address i input on the server IP.

Any idea what is the problem?

re: Setting up your internet connection in SBS 2008 console

David Overton — Sun, 08 Nov 2009 10:16:22 GMT

Pierre,

Could you send me a screen shot or share a comment with the error messages you are seeing here? Since you have tried it 20 times and it fails each time, it sounds like there is something in your network that SBS does not like.

Thanks

David

re: Setting up your internet connection in SBS 2008 console

pierre — Sat, 07 Nov 2009 23:20:06 GMT

i have done this 20 times with errors the connection did not finish

SBS 2008: Nahlédněte do přístí verze

TechNet Blog CZ/SK — Thu, 12 Jun 2008 12:00:53 GMT

Pokud se zajímáte o nový SBS 2008 a rádi byste se na něj jen tak “koukli”, můžete navštívit blog Davida

SBS 2008: Nahlednete do pristi verze

TechNet Blog CZ/SK — Thu, 12 Jun 2008 12:00:52 GMT

Pokud se zajímáte o nový SBS 2008 a rádi byste se na něj jen tak “koukli”, můžete navštívit blog Davida

SBS 2008: Nahlednete do pristi verze

Martin Pavlis - KPCS CZ, s.r.o., www.kpcs.cz — Thu, 12 Jun 2008 11:59:29 GMT

SBS 2008: Nahlednete do pristi verze

Once SBS is set up, how to do the basic configuration through the management console

David Overton's Blog — Wed, 04 Jun 2008 23:04:22 GMT

[updated 5th June 2008 - as last 2 sections now online] I saw Vijays’s post on SBS 2008 RC0 Installation

SBS 2008 how-to info on David Overton's blog

The Official SBS Blog — Tue, 03 Jun 2008 22:58:13 GMT

For some great SBS 2008 "how to" guidance, be sure to check out David Overton's blog . SBS 2008 Install